Description
The Tempest Polishing Filter was designed to be used in conjunction with an existing filtration system to provide additional mechanical and biological filtration.
The Tempest aids in water clarity and quality and filters out debris as small as 1 micron.
- Add to any existing filtration or use as a stand-alone filter on ponds up to 1320 Gallons.
- Optimum Flow Rate: 1320 GPH
- Maximum Flow Rate: 1980 GPH
- Includes 7 Liters of K+ filter media
- 1-1/2" Inlet/Outlet
- 1" Waste Discharge
- Easy to clean
HOW THE TEMPEST WORKS AND CLEANS
How it works
Water is pumped up through the Tempest filter. The K+Media moves to the top of the filter, becoming a mechanical barrier that traps debris as it flows through the system. Waste is trapped in the K+Media until the cleaning cycle dislodges it and it gets flushed away.
Easy to clean
With the pump turned off, slide valves closed, and waste valve open, air is drawn into the filter. As air and water mix inside the filter tube, the media starts to move chaotically, dislodging the trapped waste. Dirty water then exits the filter tube at the bottom via the waste line, leaving clean media.
Single Tempest as Stand-alone Filter:
Double Tempest as Stand-alone Filters:
Tempest as Polishing Filter (shown with a Nexus Filter):