A compact version of the popular Nexus filter. Provides biological and mechanical filtration using the K1 Micro filter media for ponds up to 2640 gallons.
- For Ponds up to 2640 gallons
- Maximum Flow Rate: 2640 GPH
- Manufacturer's Part #:EAZYPOD
Also available as:
(note that the automatic feature can NOT be added later to a normal Eazy Pod Filter)
How It Works
Water from the pond enters the EazyPod via the inlet and then flows around the circumference of the outer chamber of the EazyPod, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration. As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet. The EazyPod is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter. A 70 litre per minute air pump is recommended for use during the cycle cleaning.
Setup shown in a Pump Fed Installation
Setup Shown in a Gravity Fed Installation
Questions about the Eazy Pod Filter?
AquaNooga is a team of water feature experts dedicated to helping you get the maximum enjoyment out of your koi pond, water garden, or fountain. Please contact us for help with your pond or water feature questions or needs relating to products and orders. Click Here