Description
Automatic cleaning for your Nexus pond filter makes pond maintenance easier than ever.
- Converts any 200 series Nexus filter (made before 2006) into a fully automated filter
- Control box operates the pumps and valves automatically
- Adjustable timer to control the frequency of cleaning
- Manual cycle cleans with the touch of a button
- Manufacturer's Part #NEXUSAUTO220G
- Instruction Manual
This system works on 200 series Nexus Filters installed in a gravity-fed system as seen in the following diagram:
Nexus Automatic Gravity Fed cleaning cycle:
■ Adjustable timer kicks in to start a cleaning cycle.
■ Control box automatically switches circulating pump off.
■ The water level in the Nexus equalises.
■ Inlet valve closes whilst at the same time air is diverted from the outer bio chamber to the EAZY to clean the K1 Micro.
■ After K1 Micro has been cleaned, the waste valve opens.
■ Eazy is drained to waste and inlet valve opens for a final flush of the EAZY.
■ The waste valve closes.
■ Air is diverted back from the EAZY to the bio chamber.
■ Circulating pump is switched back on.
■ Nexus returns to filtration mode
